ST800-08A Indexable Deep Hole Drill Guide Pad/Guide Strip/Support Plate BTA Internal Chip Evacuation

Product Information:

• Product Model: ST800-08A
• Type: BTA Internal Chip Evacuation Indexable Deep Hole Drill Guide Pad/Guide Strip/Support Plate
  
• Corresponding Sandvik Model: 800-08A
• Function: Installed on the drill body for support
• Feature: High wear resistance

Detailed Analysis:

• BTA Internal Chip Evacuation Deep Hole Drill Guide Pad/Guide Strip/Support Plate:
  • These components play a crucial role in BTA deep hole drills, used to stabilize the drill, reduce vibration, and improve machining accuracy and surface quality.
  • Guide Pad/Guide Strip/Support Plate: These names may vary by manufacturer and application, but their functions are basically the same, providing support and guidance for the drill.
• Corresponding Sandvik Model:
  • Corresponding to Sandvik model 800-08A, indicating that the design and manufacture of this component comply with Sandvik's standards and technology.
• Function and Features:
  • Installed on the drill body for support, ensuring the drill remains stable during machining.
  • High wear resistance, capable of withstanding long-term high-strength cutting and extending service life.

Application Suggestions:

• Material Selection:
  • Due to their high wear resistance, these components are usually made of cemented carbide or other high wear-resistant materials.
• Installation and Maintenance:
  • When installing and replacing guide pads/guide strips/support plates, ensure they fit tightly with the drill body to avoid loosening or vibration.
  • Regularly check the wear of the components and replace severely worn components in a timely manner to ensure machining quality.
• Cooling:
  • Deep hole machining has high requirements for coolant pressure and flow, and the cooling system should be ensured to operate normally.

Summary:

ST800-08A BTA Internal Chip Evacuation Deep Hole Drill Guide Pad/Guide Strip/Support Plate is a high wear-resistant support component used to improve the stability and machining accuracy of BTA deep hole drills.